Hi Spencer!
ok...... here goes....
LC inks are awesome - you can use them on just about everything which is great. However...
84 results in 0.0079 seconds.
-
Hi Spencer,
Depending on the emulsion type - yes. It will be normal for some of the emulsion to fall off in the dip tank and settle at the...Leave a comment:
-
The tri-blend material is 50% poly / 25% modal / 25% cotton. So the poly content is low..... but "doable". The print will basically look light...Leave a comment:
-
Hi Jeni - some people are more sensitive to loud reverberations. It could also be where you are spraying out your screens, it creates an amplifying effect...Leave a comment:
-
Try exposing your film on a 305 mesh. That will allow more dots to rinse out. 180 is too low for that level of detail.
Next questions:...Leave a comment:
-
Ahhhhh. That is a very very small space indeed.
Plastisol ink should not stain plastics (mop sink). In fact most inks should not stain...Leave a comment:
-
Emma - What is your darkroom like? I have been in many print shops big and small. Some far far messier than others. What is management specifically...Leave a comment:
-
Nazdar has a product as does Avient/Polyone - links below. Your biggest hurdle will be finding a supplier near you so you don't spend much on shipping...Leave a comment:
-
For printing on glass i would do this.
1) Create a solid under base white
2) Create a greyscale/black and white image of your design...Leave a comment:
-
Hi Emma,
There are a couple of Silicone Inks on the market. They are all very similar. The biggest takeaway is that the ink needs to be...Leave a comment:
-
Hi!
Drying a screen is alllll about moisture evaporation. If there is too much moisture in your emulsion, it will not cross link properly....Leave a comment:
-
Here is a bullet point breakdown
-DO NOT underbase with a discharge white. There is leftover "stuff" on top of the fabric that...Leave a comment:
-
Hi Emma!
I have printed on thousands of boxes before and its actually pretty simple. You can use a light tack to help keep the boxes in...Leave a comment:
-
Hi Emma!
You will find that a lot of spot colors (across all ink types) will not have accurate CMYK color codes. This is because the color...Leave a comment:
-
Hi Spencer! While you can cure discharge ink with a flash unit or heat press, you dont want to based on the chemicals used. In the article Sage linked,...Leave a comment:
Leave a comment: